MX-7 Series is the Next-Generation of our best selling
In accordance with
our engineering concept of manufacturing equipment that can be
upgraded, we are pleased to introduce the MX-7 which is our
first major upgrade
We have re-engineered and
added a split arm that enhances the overall fluid movement of
the Motor-Arm i.e., there is one additional pivot point. The
quadruple jointed articulated design also significantly assists in
1. Positioning of the
Motor/Cutting-Tool over the area to be milled.
2. Alignment of the arms at
an ideal angle that facilitates fluid graceful movement.
Setting/Adjusting the vertical height of the motor/arm.
with two (right & left) triple jointed Hand - Rests that support
and track your motor movement.
The primary reason to
select our milling machine would be the
ease that you can perform "On the fly milling" i.e., raising and
lowering the motor/bur as you are milling side to side,
simultaneous vertical/horizontal milling
this allows you to mill a
shelf/shoulder that follows the contour of the gum line.
The Air and Electric
motor arm assembly
are interchangeable and
can be purchased separate, allowing the user to switch between
Owners of the MX-5 can have
their Milling Machines upgraded to the MX-7 (direct from us only).
and serviced in the USA.
Link for on-line Operating